Category
- Products & Services
- PO Procedure
- Buying Tips in China
- FAQ
- Contact us




(Aco Mold Co., Ltd - a good reputation company in China for custom plastic injection mold manufacturing.)
08-17-2014 10:27 下午
#1
Micro molding factories in Shenzhen/Dongguan/HK area.
Semion
08-18-2014 12:43 上午
Top #2
Hi Semion,
Interesting topic. I personally prefer small sophisticated parts over chunky simple ones...but than..this is injection moulding, there are no "simple" parts.
However: We have done parts as small as 1mm, tolerances 0.03mm no problem. Thin parts with fragile spots, demanding customers of course.
If you want to benefit from our knowledge, connections in local moulding industry, our precision moulds, our German moulding machinery (KraussMaffei, German injection master, Zeiss Metrotom and optical devices for QC). We run 2 very efficient Baby Plast for small parts.
Rüdiger
Interesting topic. I personally prefer small sophisticated parts over chunky simple ones...but than..this is injection moulding, there are no "simple" parts.
However: We have done parts as small as 1mm, tolerances 0.03mm no problem. Thin parts with fragile spots, demanding customers of course.
If you want to benefit from our knowledge, connections in local moulding industry, our precision moulds, our German moulding machinery (KraussMaffei, German injection master, Zeiss Metrotom and optical devices for QC). We run 2 very efficient Baby Plast for small parts.
Rüdiger
08-18-2014 03:24 上午
Top #3
Hi Rudiger:
Can you please tell me what is your smallest injection machine?Tons pressure? The parts I am looking to manufacture require small machines precision machines. less than 20T. Well you know you are in this business, you know what takes to make a small precision part. Is your machinery meant to manufacture these types of parts? I am not looking for a company that is molding a dashboard to make make small parts using same machine.
Regards,
Semion
Can you please tell me what is your smallest injection machine?Tons pressure? The parts I am looking to manufacture require small machines precision machines. less than 20T. Well you know you are in this business, you know what takes to make a small precision part. Is your machinery meant to manufacture these types of parts? I am not looking for a company that is molding a dashboard to make make small parts using same machine.
Regards,
Semion
08-18-2014 06:19 上午
Top #4
Hi Semion, we run 2 Baby Plast at the same time. Each has around 6to clamping force. Our machines are modified so we can run at high temperature.
Our next bigger machine is 50to Kraus Maffei. However, small parts on small machines definitely make sense if you want to keep the part price low. We produce plenty of parts with very low tolerances on the baby plast.
From my point of view precision is not about the size of the machine. It is about the quality of the mould. Combined with German machinery you are very much on the safe side.
Regards,
Rüdiger
Our next bigger machine is 50to Kraus Maffei. However, small parts on small machines definitely make sense if you want to keep the part price low. We produce plenty of parts with very low tolerances on the baby plast.
From my point of view precision is not about the size of the machine. It is about the quality of the mould. Combined with German machinery you are very much on the safe side.
Regards,
Rüdiger
08-18-2014 08:26 上午
Top #5
Hi Rudeger:
Please let me have our private email, so that I can send you drawings for the parts.
Semion
Please let me have our private email, so that I can send you drawings for the parts.
Semion
08-18-2014 10:43 上午
Top #6
Hi Semion
This is one of the molding factories I would have taken you to. I Highly recommend them
Rgds Ken
This is one of the molding factories I would have taken you to. I Highly recommend them
Rgds Ken
08-18-2014 01:24 下午
Top #7
Hi Ken:
They seem to be doing a good job of recommending themselves.
Thanks.
They seem to be doing a good job of recommending themselves.
Thanks.
Post a Comment: